How To......?

LJ50X-AB, LJ50X-AK, LJ50X-AC
Color Cartridge

1. The filling holes are located under the cap. The cap is easily removed by simply
pulling it off with your fingers. Be careful not to damage the sensors on the
back
2. Connect the needle to the syringe and fill with ink.
3. Insert the needle into the filling hole of the color to be refilled, pushing it down
into the cartridge. Note: You may feel a slight pressure because the cartridge
contains a sponge.
4. Inject about 8 ml. of ink, per color, or until the ink bubbles at the filling hole.

Black Cartridge

1. The actual cartridge is located inside a plastic shell. To remove it pry the locking
tab out and pull the cartridge out of the plastic shell. Important: All of
the parts in the cartridge are very sensitive and delicate and should not be
touched. They can be damaged easily.
2. Using a screwdriver remove the plug (not shown) from the filling hole. (Do
not remove the top).
3. Fill the syringe with ink, insert the filling needle into the filling hole and push
3/4 of the way into the cartridge. Inject about 15 ml. of ink or until the ink
tank is full.
4. Slide the cartridge back into the plastic shell and reinsert into the printer.